Answer:
Important Note the Following Products Must Run as Separate Applications:
TOPO! Regional Series
TrailSmart National Parks
National Parks Explorer 3D
========================================
I have multiple Version 4 State Series products.
First install one of the version 4 State Series Products.
Then, from the menu bar in TOPO!, please click “View.” Then choose the “TOPO! Product Setup.” Select a radio button denoting that you “have a new serial number.”
Please enter the number then click the “Activate New Product.”
Select “OK” and TOPO! will now recognize your other version 4 of TOPO!.
======================================
I have a version 4 State Series product plus version 3 and/or version 2.6.0 and higher State Series products.
Install your version 4 State Series first
Other version 4 States:
From the menu bar in TOPO!, please click “View.” Then choose the “TOPO! Product Setup.” Select a radio button denoting that you “have a new serial number.”
Please enter the number then click the “Activate New Product.”
Select “OK” and TOPO! will now recognize your other version 4 of TOPO!.
Version 3 and version 2.6.0 or higher States:
From the menu bar in TOPO!, please click “View.” Then choose the “TOPO! Product Setup.” Select the radio button denoting that you “don’t have a serial number.”
Please insert a data disc (a state disc 2 or higher) into your CD-ROM drive. Wait a few seconds and then select “Activate New Product.” After you insert a data disc into your CD-ROM drive, a window may appear displaying a folder. If so, simply close the window.
Select “OK” and TOPO! will now recognize your earlier state version of TOPO!.
========================================
I have a version 4 State Series product and Back Roads Explorer/Back Roads Explorer 3-D.
Install your version 4 State Series first
Back Roads Explorer/Back Roads Explorer 3-D:
From the menu bar in TOPO!, please click “View.” Then choose the “TOPO! Product Setup.” Select the radio button denoting that you “don’t have a serial number.”
Please insert a data disc (a Back Roads Explorer/Back Roads Explorer 3-D disc 2 or higher) into your CD-ROM drive. Wait a few seconds and then select “Activate New Product.” After you insert a data disc into your CD-ROM drive, a window may appear displaying a folder. If so, simply close the window.
Select “OK” and TOPO! will now recognize your Back Roads Explorer/Back Roads Explorer 3-D version of TOPO!.
===========================================
I have a version 4 State Series product and Weekend Explorer.
Install your version 4 State Series first
Weekend Explorer:
From the menu bar in TOPO!, please click “View.” Then choose the “TOPO! Product Setup.” Select a radio button denoting that you “have a new serial number.”
Please enter the number then click the “Activate New Product.”
Select “OK” and TOPO! will now recognize Weekend Explorer.
===========================================
I have multiple version 3 State Series products.
Please completely uninstall anything relating to TOPO from the add/remove programs found in your control panel (please make back up copies of any maps that you have previously saved). When finished, please check your hard drive for any TOPO! folders (usually one is directly off the root and the other may be found in the program files folder) and delete them. When complete, empty your recycle bin.
Install the most current version first(version numbers are printed on the front of the installation disc)
Then, for the version 3 states:
Insert Disc 1 and just run the " Map Pak Installer", located at “x:\xx_D01\XXMAPPAK\SETUP.EXE". (For example; Insert Disc 1 of "TOPO! Colorado" and just run the "Colorado Map Pak Installer", located at "?:\CO_D01\COMAPPAK\SETUP.EXE".)
===========================================
I have a version 3 State Series product plus other version 3 and/or version 2.6.0 and higher State Series products.
Please completely uninstall anything relating to TOPO from the add/remove programs found in your control panel (please make back up copies of any maps that you have previously saved). When finished, please check your hard drive for any TOPO! folders (usually one is directly off the root and the other may be found in the program files folder) and delete them. When complete, empty your recycle bin.
Install the most current version first (version numbers are printed on the front of the installation disc)
Then, for the version 3 states:
Insert Disc 1 and just run the " Map Pak Installer", located at “x:\xx_D01\XXMAPPAK\SETUP.EXE". (For example; Insert Disc 1 of "TOPO! Colorado" and just run the "Colorado Map Pak Installer", located at "?:\CO_D01\COMAPPAK\SETUP.EXE".)
For the version 2 States:
Just create empty map level 1 folders inside the "TPO_DATA" folder that resides with the TOPO! application. This will instruct TOPO! to look for map data on those State Series CD-ROMs. To do this, locate the TPO_DATA folder (which should be at "C:\TOPO!\TPO_DATA\"), and create a new folder inside it: called "xx1_MAP1.” “xx” is the State abbreviation. (For example; just create an empty map level 1 folder inside the "TPO_DATA" folder that resides with the TOPO! application. This will instruct TOPO! to look for map data on the Utah CD-ROMs. To do this, locate the TPO_DATA folder (which should be at "C:\TOPO!\TPO_DATA\"), and create a new folders inside it: called "UT1_MAP1.")
==============================================
I have multiple version 2 State Series products.
Install the most current version (version numbers are printed on the front of the installation disc)
For the other version 2.x States, just create empty map level 1 folders inside the "TPO_DATA" folder that resides with the TOPO! application. This will instruct TOPO! to look for map data on those State Series CD-ROMs. To do this, locate the TPO_DATA folder (which should be at "C:\TOPO!\TPO_DATA\"), and create a new folder inside it: called "xx1_MAP1.” “xx” is the State abbreviation.
(For example; just create an empty map level 1 folder inside the "TPO_DATA" folder that resides with the TOPO! application. This will instruct TOPO! to look for map data on the Utah CD-ROMs. To do this, locate the TPO_DATA folder (which should be at "C:\TOPO!\TPO_DATA\"), and create a new folders inside it: called "UT1_MAP1.")
